Burrs remained by nylon/wire brushes due to insufficient grinding force and manual deburring was required later.
Automated deburring realized with machining center by contouring the cut-out portion of female bolts with brush after processing the tap. Also, surface quality stabilized.
|Part name||Shaft parts|
|Tool||XEBEC Brush for Surface (A21-CB25M)|
|Details of processing||Deburring (contouring) unfinished parts of female screw with inner diameter Φ24.|
|Spindle speed (min⁻¹)||3000|
|Table feed (mm/min)||–|
|Depth of cut (mm)||–|
|Machining time (sec)||–|