XEBEC Stone™ Mounted Point

XEBEC Stone Mounted Point has grinding power on the entire surface of the head. It allows deburring in various ways as long as the tip of the head portion contacts with the processing area.
It can be attached to a pneumatic tool as well as an electric rotary tool since it is tolerant to high speed.

Please use at a rotational speed within the maximum rotational speed in the table below.

If the tip is worn out, form it with a diamond disc blade or grinder.

You can also customize the shape depending on the application or workpiece shape.

Always wear protective goggles, gloves and masks when using the tool.
Wear long sleeves, tight cuff, and clothing to minimize skin exposure.

Cutting particles and burrs may scatter within the work area as the tools rotate.
Please stay clear of the area.

The working area is hazardous in case flying pieces of fiber rods from the tools and grinding powder may scatter.
Enclose your working area to prevent other people from entering or have htem wear protective equipment as well.

Follow the precautions for use and operation safety measures without fail.

If you fail to observe them, there are following risks.

*A tool or a part of tool may crack, drop off, distort or break.

*Broken pieces of a tool or grinding dust may stick into your skin, or at worst stick into yours eyes, causing loss of sight.

*Dust generated by machining process may bring up skin irritancy or allergy.